Miele KWL 4812 S - Manual (Page 26)

The appliance is supplied right hand
hinged. If left hand door hinging is
required, follow the instructions below.
Removing the door handle:
First the side section of the handle must
be removed:
^ Pull door handle a towards you. Side
section
b slides back, creating a
gap
d between side section b and
mounting plate
c.
^ Place a suitable object (e.g. a spoon
handle) in gap
d, and slowly lever
the handle towards the door.
Be careful not to let the "spoon
handle" slip, causing damage to the
appliance.
The side section
b can now be
removed.
^ Pull side section b out of the guides
on the mounting plate.
^ Loosen the 4 screws (Torx 15) in the
mounting plate, and remove the
handle.
^ Remove the cover caps from the
opposite side, and fit them into the
empty holes.
Changing over the door:
^ Close the appliance door, unscrew
hinge bracket
a, and take the door
off.
^ Take hinge pin b out of the hinge
bracket, then refit it in the second
hole of the hinge bracket. (Use the
spanner supplied to unscrew and
refit the hinge pin).
^ Use the spanner supplied to unscrew
upper hinge pin
c, and refit it on the
other side.
^ Remove stoppers d, and unscrew
bracket
e . Refit the bracket and
stoppers on the other side of the
door.
Changing the door hinging
26