Miele TOUCHTRONIC PREMIER PLUS HG01 - Manual (Page 39)

What if … Possible fault Fix
the "Intake/Drain" indi-
cator is lit or flashing.
The dishwasher may
have stopped? The water valve is closed. Open the water valve.
The filter in the water inlet
is blocked. See maintenance instruc-
tions.
The flow pressure at the
water inlet is less than
4.5 psi (0.3 bar). Contact a plumber.
The waterproof system has
activated. Call the Miele Technical
Service Department.
the "Intake/Drain" indi-
cator lights during the
"Energy Saver" pro-
gram? The intake water has not
reached the required tem-
perature of 115 °F/45 °C,
the hot water system may
be overloaded, see "Pro-
gram guide". – Start the program again.
– If the indicator light co-
mes on again, select a
different program.
Frequently asked questions
39