Memorex MPH6929 - Manual (Page 27)

4) Press
skip
or
repeat
until you hear the current hour setting. Numbers
1 through 12 display on the base as each hour is announced.
5) Press
clock
again to select the correct hour.
6) Press
skip
or
repeat
until you hear the current minute setting. The
numbers 0 through 59 display on the base as each minute
is announced.
7) Press
clock
again to select the correct minute. The AM/PM setting
is announced.
8) The LED displays an A or P. Press
skip
or
repeat
until you hear the
correct AM/PM setting.
9) Press
clock
again to end the time/day setting. The MPH6929
announces the time that you have set.
SETTING YOUR OUTGOING MESSAGE (GREETING)
When you receive a call, the answering system automatically plays
either a preset message or your own personal outgoing message.
▼
Preset message
The following message is prerecorded:
“Hello, no one is available to take your call. Please leave a message
after the tone.”
To record your own greeting, follow the steps below.
▼
Recording your personal outgoing message
1) Press and hold
OGM
until you
hear a long tone. Start recording
your message immediately after
you hear the long tone end. The
message counter LED will blink,
indicating record mode.
22
ANSWERIN
G
DEVICE
SETUP
You can record up to a 30-
second outgoing message.
Stand within 12 inches in
front of the microphone
and speakclearly when
recording your outgoing
message.
F:...MPH6929ENG.VP
Thu Jun 14 15:47:42 2001
Color profile: Disabled
Composite Default screen