Miele NOVOTRONIC W 1966 - Manual (Page 19)

Cancelling a program that has
started
^ Turn off the washer with the "On/Off"
button.
^ Turn the program selector to "End".
^ Turn on the washer with the "On/Off"
button.
^ Turn the program selector to
"Drain/Spin".
^ Select the desired spin speed.
^ Press "Start".
Making changes to the pro-
gram
The following changes can be made to
a program once it has already started:
– the spin speed may always be ad-
justed.
– up to 6 minutes after the start of a
program the wash options "Sensitive"
and "Extended" can be selected or
deselected and the temperature of
the program can be changed to an-
other temperature within the same
program.
Once the program starts you can not
change to a different program.
The "Anti-crease/End" indicator will
blink if the program selector has been
moved. The program will not be af-
fected. The indicator will go out, if the
program selector is turned back to the
original program.
Skipping part of a program
^ Turn the program selector to "End".
When the desired program cycle
flashes in the program sequence dis-
play:
^ Turn the program selector, within
4 seconds, back to the original pro-
gram.
To change a program
^ Turn off the washer using the "On/Off"
button.
^ Turn the program selector to "End".
^ Turn on the washer using the "On/Off"
button.
^ Select the new program.
^ Select the desired spin speed.
^ Press the "START" button.
Using the washer
19