Memorex MVR4051/MVR4052 - Manual (Page 17)

17
ENGLISH
TO REWIND OR FORWARD THE TAPE
RAPIDLY
Press the REW button in the
STOP mode.
" " will appear on the screen for
about 4 seconds.
Press the F.FWD button in the
STOP mode.
" " will appear on the screen for
about 4 seconds.
When a tape is played, the Digital Auto Tracking System
automatically adjusts the tracking to obtain the best
possible picture. If noise bars appear during playback,
adjust the tracking manually:
• Press the TRACKING SET + or – button to obtain the
best possible picture. To resume automatic tracking,
press the AUTO TRACKING button.
FORWARD/REVERSE PICTURE SEARCH
If you want to see the tape program during REW or
F.FWD mode, press and hold the REW or F.FWD button
again. The backward or forward visual search picture
will be seen on the screen. Release the button to return
to the REW or F.FWD mode.
DIGITAL TRACKING CONTROL
TO START PLAYBACK
TO STOP PLAYBACK
CHECK BEFORE YOU BEGIN
Turn ON the TV and set to the video channel 3 or 4.
When a TV is connected with an audio/video cable,
turn the TV and this VCR on and select the video input
mode on the TV.
1 Load a prerecorded tape
(When loading a cassette tape
without the erase prevention
tab, playback will start auto-
matically).
2 Press the PLAY button.
Playback will start.
"
" will appear on the screen
for about 4 seconds.
Press the STOP button once.
The tape will stop but remain fully
loaded and ready to play.
" " will appear on the screen for
about 4 seconds. LOADING
UNLOADING
Use only video cassette tapes marked .
Push the center of the tape until it
is automatically retracted.
AUTOMATIC POWER ON
The VCR will turn on automatically
and the POWER indicator will light.
AUTOMATIC PLAY
When loading a cassette tape without the erase preven-
tion tab, playback will start immediately.
Insert the cassette with its labeled side facing you. An
inverted cassette cannot be inserted.
To unload a cassette, press the
STOP/EJECT button on the VCR
twice. The first press will stop the
tape in any mode. The second
press will eject the tape. "
" will
appear on the screen for about 4
seconds.
AUTOMATIC EJECT
If the VCR automatically rewinds the tape to the begin-
ning (AUTO REWIND FEATURE), the tape will be
ejected automatically (See the NOTE on page 19).
To play a prerecorded cassette tape.
NOTES: • Always eject the tape when not in use.
• The cassette can be ejected even if the VCR
is turn off.
This VCR selects the playback tape speed SP, LP or
SLP automatically.
LOADING AND UNLOADING
PLAYBACK
4F21301A E P14-19 6/26/02, 3:53 PM 17