Metra Electronics 95-7339S - Manual (Page 5)

5
Kit Assembly 95-7339
1. Locate the factory wiring harness in the
dash. Metra recommends using the
proper mating adapter from Metra or
AXXESS. Re-connect the negative
battery terminal and test the unit for
proper operation.
2. Attach the Double DIN brackets to the
aftermarket radio then mount the unit in
the sub dash. (Figure A)
3. Reassemble dash in reverse order of
disassembly using the 95-7339 trim
panel instead of the factory trim panel.
Double DIN/stacked ISO DIN
head unit provision
(Figure A)