Monte Carlo Fan Company 5VL52 - Manual (Page 5)

Screw the light fitter back through the decorative
cap into the switch housing hole. Connect the
black wire from the light kit to the blue wire
from the fan marked for light kit. Connect the
white wire from the light kit to the white wire
from the fan marked for light kit. Re-attach
switch housing to fan.
16
ATTACHING LIGHT KIT
CAUTION: Make sure power is off. If you pur-
chase a light kit for your fan and would like to
install onto your fan start by unscrewing the
switch housing cap and tab from the switch hous-
ing. Feed the black and white wires of the light kit
through the hole in the decorative cap and the
hole in the switch housing.
15