MITSUBISHI ELECTRIC LVP-X400U - Manual (Page 15)

EN – 15
ENGLISH
Basic operation
Several settings can be adjusted using Menu.
EXAMPLE: Auto power off time setting
1. Press the MENU button.
2. Press the
$ or % button to select the OPTION menu.
3. Press the ENTER button (or
} button).
4. Press the { or } button to select AUTO POWER
OFF.
5. Press the
$ or % button to adjust auto power off
time.
6. Exit the menu system by pressing the MENU but-
ton several times.
• If the menu operation is not working, press the
RESET button on the terminal board using a suit-
able sharp object, push gently.
• The settings with 2 mark, you should press the
ENTER button after selecting.
Menu operation
Opt
IMAGE
XGA60
Opt
INSTALLATION
XGA60
Opt
INSTALLATION
XGA60
OFF
KEYSTONE 0˚
AUTO POWER
ON
OFF
SPLASH SCREEN ON
AUTO POWER
OFF
OFF
IMAGE REVERSE
ON
AUTO POWER
ON
OFF
SPLASH SCREEN ON
AUTO POWER
OFF
OFF
ON
AUTO POWER
ON
OFF
SPLASH SCREEN ON
AUTO POWER
OFF 30 min
ON
PICTURE CONTRAST
±
30
BRIGHTNESS
COLOR MATRIX
± 30
STANDARD
HIGH
LOW
USER
COLOR TEMP.
SHARPNESS ± 10
TINT
±
10
COLOR ± 10
CONTRAST R ± 30
CONTRAST B ± 30
BRIGHTNESS R
±
30
BRIGHTNESS B
(Displays only when the source is selected to VIDEO)
(Displays only when the source is selected to VIDEO)
(AUTO : When the source is selected to COMPUTER)
± 30
EXPAND MODE 1 - 4
FRAME POSI. 1 - 5
INSTALLATION
IMAGE REVERSE OFF, MIRROR, INVERT, MIRROR INVERT
KEYSTONE
AUTO POWER ON ON , OFF
RESET ALL OK
AUTO POWER OFF
ON , OFF
OPTION MENU POSITION 1 (Upper left), 2(Lower right)
SPLASH SCREEN
ON , OFF ANAMORPHIC
VIDEO SIGNAL AUTO , NTSC , PAL , SECAM , 4.43NTSC , PAL-M , PAL-N , PAL-60
LANGUAGE , English , Español , Deutsch , Français , Italiano ,
1
RED
±
30
CYAN
±
30
GREEN ± 30
YELLOW ± 30
BLUE ± 30
MAGENTA ± 30
SATURATION
±
5
2
USER USER
OFF
SIGNAL MEMORY CALL AUTO, USER1, USER2
HORIZ.POSITION 0 - 999
VERT.POSITION 0 - 999
FINE SYNC. 0 - 39
TRACKING
USER
0 - 9999
CLAMP POSITION 0 - +63
CLAMP WIDTH 1 - 63
HORIZ. PIXELS 0 - 9999
VERT LINES 0 - 9999
PLL AUTO, 0 - 7
SHUTTER(L) 0 - 383
SHUTTER(U) 0 - 383
SHUTTER(RS) 0 - 510
SHUTTER(LS) 0 - 510
VERT. SYNC AUTO, ON, OFF
MEMORIZE
*
*
*
HOLD AUTO
USER1, USER2
DELETE USER1, USER2
DEFAULT
ON BEGIN -1 - -99
END 1 - 99 OFF
COMPUTER INPUT RGB, YC B C R / YP B P R
*
*
*
*
* : Setting range is different
according to the type of
the signal.
OFF, 5, 10, 15, 30, 60 min
-15˚, -12˚, -9˚, -6˚, -3˚, 0˚, +3˚, +6˚, +9˚, +12˚, +15˚