Miele 06 702 810 - Manual (Page 44)

With the aid of the following guide, minor problems can be easily corrected
without calling in a Miele service technician, saving you both time and money.
The following guide may help you to find the reason for a fault, and to correct it.
You should, however, note the following:
,
Repairs should only be carried out by a suitably qualified and trained
person in accordance with current local and national safety regulations.
Unauthorised or incorrect repairs could cause personal injury or damage the
appliance.
Technical problems
Problem Possible cause Remedy
The Start/Stop indicator
does not flash after the
dishwasher has been
switched on using the
On/Off button
s .
The appliance is not
plugged in. Insert the plug and switch
on at the socket.
The fuse is defective or
has tripped. Reset or replace the fuse.
The dishwasher stops
during a programme. The fuse is defective or
has tripped. Reset or replace the fuse.
Problem solving guide
44