Monte Carlo Fan Company 5EG60XX Series - Manual (Page 4)

Install switch cap by reinstalling the
4 screws removed.
23
There is a manual reverse switch
located on on the switch cap
installed in step 23. Fan must be off
to reverse.
24
Connect 9 pin plug from fan to
switch housing 9 pin plug.
19
Black capacitor box needs to be
stuck to the switch housing. Not
being attached can cause motor
noise.
Remove twin adhesive tape from the
black capacitor as shown above.
21 20
Place and press firmly on the capaci-
tor to stick it to the switch housing.
Be sure it is secure.
22