Mustek LM-3000 - Manual (Page 9)

LM-3000 USER’S MANUAL - page 7
Step 3: Upon restart, select the desired display settings from the
Display property dialog box. Click on Test to test the newly selected
graphics mode. A color test screen should appear, followed by the
Testing Mode window. Click on Yes to continue. The Display
Settings Change window will appear. Click on Restart Now for the
new settings to take effect.
VII. CONTROL AND ADJUSTMENT
•
Horizontal slide : The panel can be pushed left or right to slide
without moving the base through a distance of
36 mm each side.
•
Swivel : The panel can be horizontally rotated, using the
pivot on the base, 45° each way.
•
Tilt : The panel can be folded backward from the
upstraight porition to nearly horizontal
position, total range is 85°.
•
Brightness : On the rear side of the LCD display panel,
there are two control knobs to control the
picture displayed. The left one (as viewed from
the rear side) marked as
“ ” controls the
brightness of the picture. Turning it clockwise
as viewed from the rear side will increase the
brightness of the picture, and turning it counter
clockwise will decrease the brightness.
•
Contrast : The other one marked “ ” located to the right
as viewed from the rear side controls the
contrast of the picture. Turning it clockwise as
viewed from the rear side will increase the
contrast of the picture, and turning it counter
clockwise will decrease the contrast.