Motorola PTP 600 User Manual
Page 7
GPS SynchronizaTion UniT GUiDE
Installation continued
The following diagram shows how to connect the UltraSync™ GPS-100M to the PTP 600 oDU fitted with
a Lightning Protection Unit (PTP-LPU):
The UltraSync GPS-100M sits between the Lightning Protection Unit and the oDU (outdoor unit) of a PTP
600 Series link. one UltraSync GPS-100M is required for each link. The unit receives a stable, accurate timing
signal from its integrated GPS receiver, which obtains signals generated concurrently from 12 medium-earth-
orbit satellites. That signal is fed to the PTP 600 oDU via its Sync port, giving the link a reference point for
timing synchronization.
UltraSync GPS-100M
deployment diagram with a
PTP 600 Series radio and a
PTP Lightning Protection Unit
once the UltraSync GPS-100M has been installed, the PTP 600’s TDD synchronization capability can be
enabled and configured using the PTP 600’s installation wizard. For complete installation details, refer to the
UltraSync GPS-100M User Manual and the PTP 600 User Manual.