Memorex MT1091 - Manual (Page 11)

– 10 –
SETTING THE CLOCK
a Press the MENU button twice to bring
up the menu screen and select CLOCK
SET.
CLOCK SET
SUN – – : – – AM
EXIT
[MENU] : MOVE
[+] / [–] : ADJUST
s Use the + or – button to select the cor-
rect day of the week.
CLOCK SET
TUE – – : – – AM
EXIT
[MENU] : MOVE
[+] / [–] : ADJUST
d Press the MENU button to go to the next
step.
f Use the + or – button to select the cor-
rect hour(s).
CLOCK SET
TUE 1 : – – AM
EXIT
[MENU] : MOVE
[+] / [–] : ADJUST
g Press the MENU button to go to the next
step.
h Use the + or – button to select the cor-
rect minute(s).
CLOCK SET
TUE 1 : 3 5 AM
EXIT
[MENU] : MOVE
[+] / [–] : ADJUST
j Press the MENU button to go to the next
step.
k Use the + or – button to select AM or
PM.
CLOCK SET
TUE 1 : 3 5 PM
EXIT
[MENU] : MOVE
[+] / [–] : ADJUST
l Press the MENU button. EXIT will flash.
; Press the + or – button to exit.
NOTES
• To display the day and time at any time.
Press the RECALL button twice. To
remove the display, press the RECALL
button again.
• To correct the day or time, follow step 1
to bring up the clock set menu. Then
press the MENU button until the section
of the display you want to correct is
flashing. Use the + or – button to cor-
rect the day or time. Finally, press the
MENU button until EXIT is flashing,
then press the + or – button to exit.
• You may have to reset the clock if there
is a power outage or if you unplug the
TV.