Metra Electronics 95-8210 - Manual (Page 5)

95-8210 KIT ASSEMBLY
3
B
A
C
DOUBLE DIN RADIO PROVISION
Snap the Double DIN brackets to the
outside edge of the Double DIN trim
plate. (Figure B) 2
Snap the factory brackets to the side
of the radio. (Figure A) 1
Slide the Double DIN radio into the
bracket/trim plate assembly and
secure the radio to the assembly
using the screws supplied with the
radio. (Figure C) 3
Continue to final assembly.
* Note: Refer also to the instructions included with the aftermarket radio.