Motorola ENLN4104 - Manual (Page 5)

PMTN4025BR
WPPN4065BR
WPLN4106BR
WPLN4187A
4
Charging Accessories
Designed to work as a total system with the 2-
way radio and battery, Motorola original chargers
maximise the battery life and keep batteries in tip-
top condition. Choose from the single tri-chemistry
single/multi unit charger to the sophisticated 6-slot
battery maintenance system that provides battery
health diagnostic and re-conditioning capabilities.
Single uniT Tri-CHeMiSTry, raPid raTe
Utilise an enhanced charging algorithm that helps maximise the life of
your batteries. Compatible for NiCd, NiMH and Lilon batteries. Nickel-
based batteries will be fully charged in approximately 90 minutes
(depending on battery capacity). Full charging of Lilon batteries may
take approximately 3 hours. Allows battery only or radio/battery
combination charging.
PMTn4024a Single unit rapid Charger
110V – US plug
PMTn4025a
Single unit rapid Charger
230V – Euro plug
PMTn4026a Single unit rapid Charger
230V – UK plug
Single uniT CondiTioning CHargerS
Utilise enhanced pulse charging interpersed with regular discharge
pulse current to minimise “memory-effect” and overheating of NiCd
and NiMH batteries. A standard capacity battery takes approximately
90 minutes for a full charge. Pulse maintenance charging after a full
charge maintains peak capacity for the battery.
WPln4107br Single unit Conditioning Charger
110V –US plug (Battery adapter included)
WPln4106br Single unit Conditioning Charger
230V –Euro plug (Battery adapter included)
3080384g15 Cigarette light adapter
4-SloT CondiTioning CHargerS
Choose also from the four slot multi-conditioning chargers that utilises
regular pulse current to minimise “memory-effect” and overheating
of Nickel-Based batteries. Full charging in approximately 90 minutes.
Batteries must be removed from radios to perform conditioning
charging since radio contacts must be used.
WPPn4065br 4-Slot Multi Conditioning
110V –US cord (Battery adapter not included)
WPPn4076br 4-Slot Multi Conditioning
230V –Euro cord (Battery adapter not included)
WPPn4082br gP328 battery adapter
(Order separately)
impres™ SMarT energy SySTeM
The impres smart energy system ensures maximum talk-time
and optimized battery cycle life through the use of its advanced
charging algorithm and automatic reconditioning features. The
smart energy system reconditions impres batteries when they
need it, automatically, keeping them in peak condition. Its advanced
conditioning features allow batteries to be safely left on the charger
for extended periods of time without incurring the damaging heat
build-up which can rob batteries of cycle life. In addition, batteries
left on the charger are kept fully charged so they are always ready
when you need them. The impres system reconditions batteries when
they need it based on their usage pattern. Talk time and cycle life are
optimized and the need for manual maintenance programs reduced
or eliminated. Although complete smart features are realised only
when using impres batteries and chargers, together impres chargers
can also handle legacy batteries; in fact, the multi-unit chargers can
simultaneously charge legacy and impres batteries.
impres™ Single uniT CHarger
WPln4182a impres™ Single Unit Charger 110V US Plug
WPln4183a impres™ Single Unit Charger 230V UK Plug
WPln4184a impres™ Single Unit Charger 230V EU Plug
WPln4185a impres™ Single Unit Charger AUST Plug
impres™ MulTi-uniT CHarger
WPln4187a impres™ Multi-unit Charger US Cord
WPln4188a impres™ Multi-unit Charger UK Cord
WPln4189a impres™ Multi-unit Charger EU Cord
WPln4190a impres™ Multi-unit Charger AUST Cord
WPln4145a impres™ Multi-unit Charger KOREA Cord
WPLN4182A