Morphy Richards 2 & 4 Slice Chrome & Stainless Steel Toaster - Manual (Page 5)

Place the buns or other
items onto the bun warmer.
Set the browning control to
the bun warmer position
‡ . Depress the bread
carriage lever until it holds
down. Wait for the toaster
to switch off automatically
or press the cancel button
to switch the toaster off
before removing the buns.
WARNING: Take care not
to touch the metal of
the bun rack as this will
be hot.
Do not put more than two
buns on the bun warmer at
any one time.
Crumb tray(s)
WARNING: Crumbs will
accumulate in the
crumb tray(s) and could
catch fire if not emptied
regularly.
When the appliance has
cooled down completely,
tap the sides of the case
lightly to dislodge any
crumbs lodged in the
toasting chamber and
remove the crumb tray(s)
„ . Empty the tray(s) and
replace D.
Never operate the
appliance without the
crumb tray(s) fitted.
CLEANING AND
MAINTENANCE
1 After use and before
cleaning, switch off at the
mains, remove the plug
from the wall socket and
wait for the toaster to cool.
2 Wipe the outside of the
toaster with a damp cloth
only and dry with another
cloth or tissue.
• NEVER use metal polish or
coarse scouring agents and
never immerse your toaster
in any sort of liquid.
• NEVER use any pointed or
sharp articles for cleaning
the inside, otherwise the
heating element will be
damaged.
• NEVER use a brush or
push your fingers or metal
objects down the slots.
• NEVER immerse your
toaster in water.
HINTS AND TIPS
• In order to achieve uniform
browning, we recommend
you wait a minimum of 30
seconds between each
toasting, so that the control
can be automatically reset.
• If toasting one slice only,
you may need to adjust the
browning control to a
slightly lower setting.
• Note: you will also notice a
slight variation in toast
colour on one side of a
single slice.
• Stale bread toasts more
rapidly than fresh bread.
Therefore, the browning
control should be set at a
lower setting than usual.
• All sorts of bread can be
used as well as teacakes,
small rolls etc. However,
slices should not be so
thick as to cause burning
or jamming within the
bread slots.
• When toasting two or more
items, it is recommended
they are of equal size and
freshness.
• Do not lift or move the
toaster by inserting fingers
into the bread slots.
• If the bread in your toaster
becomes jammed,
disconnect your toaster at
the socket, allow it to cool,
then remove the bread.
• Allow the toaster to cool
fully before putting away.
TROUBLE
SHOOTING
• Has the toaster been set
correctly - is the plug in it’s
socket and the switch in
the ‘on’ position?
• Is the plug itself or the
socket faulty - check this
by plugging in another
appliance.
• Does the fuse need
replacing - if you have fitted
your own plug, are the
internal plug connections
secure and correctly
made?
HELPLINE
If you have any difficulty
with your appliance, do not
hesitate to call us.
We are more likely to be
able to help than the store
from where you bought it.
Please have the following
information ready to enable
our staff to deal with your
query quickly.
• Name of the product.
• Model number as shown
on the underside of the
appliance.
• Serial number as shown on
underside of the appliance.
UK Helpline
0844 871 0957
Replacement Parts
0844 873 0723
Ireland Helpline
1800 409 119
55 UUKK HHeellpplliinnee 00884444 887711 00995577 RReeppllaacceem meenntt PPaarrttss 00884444 887733 00772233 IIrreellaanndd HHeellpplliinnee 11880000 440099 111199
D
44415 rev3 30/9/08 13:06 Page 1