Mercedes-Benz 2005 C 240 4MATIC - Manual (Page 357)

355
Practical hints
Towing the vehicle
Installing towing eye bolt
1 Cover on right side of front bumper.
2 Cover on right side of rear bumper.
Removing cover
̈ Press mark on cover 1 or 2 in
direction of arrows.
̈ Lift cover off to reveal threaded hole for
towing eye bolt.
The towing eye bolt is supplied with the
tool kit (located behind the left hand trim
panel in cargo compartment).
̈ Screw towing eye bolt in to its stop and
tighten with lug wrench.
Reinstalling cover
̈ Fit cover 1 or 2 and snap into place.