Memorex MD6460 - Manual (Page 13)

12
CD OPERATION (CONTINUED)
With a CD inserted, press the
PLAY/PAUSE (®p)/POWER ON button 1
to turn the unit on and press the STOP
(■)/POWER OFF button 2 to stop auto
playback. Press the PROG button 3; the
Track (00), program number (P-01) and
PROG indicator will appear in the CD
display.
1
3
2
1
Select the first track to be played back
using the SKIP/SEARCH o 1 or n
❷
button, then press the PROG button ❸
again. Repeat this step to program
additional tracks up to a maximum of 24
tracks.
3
2 1
2
TO PROGRAM THE MEMORY (UP TO 24 TRACKS)
Press the PLAY/PAUSE
(
®p
)/POWER ON button ❶ to begin
Programmed playback and adjust the
VOLUME control ❷ and DBBS switch
❸
as desired.
2
3
1
3
To skip forward or backward through
the programs, press the SKIP/
SEARCH o 1 or n ❷ button. When
the disc is through playing, it will stop.
2 1
4
NOTES:
• Press the STOP (■)/POWER OFF button to stop the disc before it is finished.
• As each program is played, the track number is shown in the display.
• To clear the memorized program, press and hold the PROG button while in
the Stop mode until the PROG indicator disappears in the display.
• Programming is the ability to preselect the order in which a series of tracks
will be played.
• Each track may be stored in the program memory as many times as desired
(up to 24 tracks).