Mercedes-Benz 2002 C 320 - Manual (Page 339)

336 Towing the vehicle
Technical
data
Instruments
and controls
Operation Driving
Instrument
cluster display
Practical hints Car care Index
1 Cover on right side of front bumper
To remove cover:
Press mark on cover in direction of arrow and lift cover
off to reveal threaded hole for towing eye bolt. The
towing eye bolt is supplied with the tool kit (located
behind the left hand trim panel in cargo area). Screw
towing eye bolt in to its stop and tighten with lug
wrench.
To reinstall cover:
Fit cover and snap into place.
2 Cover on right side of rear bumper
To remove cover:
Press mark on cover in direction of arrow and lift cover
off to reveal threaded hole for towing eye bolt. The
towing eye bolt is supplied with the tool kit (located
behind the left hand trim panel in cargo area). Screw
towing eye bolt in to its stop and tighten with lug
wrench.
To reinstall cover:
Fit cover and snap into place.
S203.book Seite 336 Freitag, 19. Oktober 2001 1:25 13