McIntosh MVP861 User Manual

Page 49

How to Operate the MVP861, con’t

Figure 93

4. To start playback of the just entered program press

the PLAY Push-button. The Repeat Mode can be
activated to provide continuous playback of the
Programmed Selections. Refer to figure 94.

Note: To momentarily stop playback press either the

Pause Push-button or the STOP Push-
button once. To resume Program Playback
press the
PLAY
Push-
button.

5. To cancel the

Program Playback Mode press the STOP Push-
button twice followed by pressing the PGM (Pro-
gram) Push-button.

Reset of Microprocessors
In the unlikely event the controls of the MVP861 stop
functioning, the microprocessors can be reset by perform-
ing the following:

1. Press and hold in the

STANDBY/ON Push-but-
ton for approximately five
seconds. Refer to figure 95.

Note: This can be

performed with the
MVP861 On or in the
Standby Mode.

2. When the STANDBY/ON LED is no longer illumi-

nated release the STANDBY/ON Push-button.

3. The MVP861 will automatically switch On and

normal operation will resume.

Figure 94

Figure 95

Figure 96