Installation – Miele HG02 User Manual
Page 24

If the adjacent cabinetry (or appli-
ance) does not have drawers and
alignment to a drawer line is not
possible:
^ Hang the bracket on the machine
door, without the templates. Tighten
the four locking screws on the edges
of the door panel.
^ Close the door.
^ Measure the distance from the adja-
cent cabinet’s (or appliance) door
bottom to the bottom of the mounting
bracket (X).
^ Draw a line on the rear of the door
panel (X) inches up from the bottom.
^ Remove the bracket from the ma-
chine door and place it on the rear of
the door panel so that:
– the bracket is centered left to
right,
– the bottom of the bracket is
aligned with the (X) line.
^ Tape the bracket to the door panel to
hold it in place while the mounting
holes are drilled.
^ Drill pilot holes for the screws using a
3
/
32
" (2.5 mm) bit.
^ Attach the bracket to the panel using
the 6 screws provided.
Installation
24
- G 1262 (60 pages)
- G 2732 (76 pages)
- G 1202 (60 pages)
- G 2872 (80 pages)
- G 5935 SCi XXL (2 pages)
- G643SCVI (52 pages)
- G848 (60 pages)
- G 5970 (84 pages)
- INSPIRA SERIES G 2140 (52 pages)
- HG01 (36 pages)
- ADVANTA G 2180 (56 pages)
- OPTIMA SERIES G 2430 (60 pages)
- NOVOTRONIC G 841 SC PLUS (48 pages)
- G 4500 (56 pages)
- G 2020 (52 pages)
- G658SCVI (52 pages)
- G 5795 (84 pages)
- G 5575 (72 pages)
- G1470 (60 pages)
- G 2630 SCi (72 pages)
- Platinum G892us (52 pages)
- 05 620 661 (36 pages)
- ESS 3060-10 (16 pages)
- G892 (52 pages)
- G 2150 (52 pages)
- G 5875 (76 pages)
- NOVOTRONIC G 842 SC PLUS (48 pages)
- G 2670 SC (76 pages)
- LaPerla G 2830 SCi (80 pages)
- G 5515 (68 pages)
- G 1182 (56 pages)
- G 7856 (56 pages)
- G 2180 (56 pages)
- G 4570 (60 pages)
- TOUCHTRONIC PREMIER PLUS HG01 (56 pages)
- G 2183 (56 pages)
- EXCELLA G 2630 SCI (72 pages)
- G 2472 (60 pages)
- G 5910 (86 pages)
- G 2832 (80 pages)
- NOVOTRONIC G 851 SC PLUS (52 pages)
- NOVOTRONIC G 856 SC ELITE (52 pages)
- INSPIRA G 2140 (52 pages)
- G 5815 (72 pages)
- G2142 (60 pages)