Memorex MPH6935 - Manual (Page 16)

Receiving Calls
1
Phone rings.
When the handset receives a Caller ID
message, the following display appears.
2
Press TALK/FLASH . “ Talk ” and the
volume setting appears on the display.
3
To hang up, press OFF or place the handset
in the base.
The call time will be displayed for about
5 seconds.
Receiving a call
Instant Talk when ringing
When the Instant Talk setting is on and there is an incoming call, simply lift the
handset from the base unit to answer the phone.
Any key when ringing
When the Instant Talk setting is on and the handset is off the base, press
TALK/FLASH , any number key, * / t /TONE or #/ s to answer the incoming call.
Call Waiting
Note: You must subscribe to Call Waiting service to use this feature.
When a call is received during a telephone call already in progress, press TALK/FLASH
to switch to the new call. If you also subscribe to Caller ID on Call Waiting, you will
see the name and number of the caller in Call Waiting (See page 31.)
Note
Instant Talk is initially set to off as the default setting.
To turn it on, proceed to setting Caller ID options. (See page 26)
16
MPH6935_OM Eng 3/12/02 3:07 PM Page 16