Miele S 500 - Manual (Page 31)

When to change the thread
catcher pads
Check the thread catchers on the
bottom of the standard floor brush and
the upholstery nozzle, from time to time.
Replace the thread catchers if the pile
is worn.
Replacing the thread catchers
^ Use a knife or similar object to
remove the thread catchers from the
slots.
^ Insert the new thread catchers.
Servicing the floor roller
^ Use a coin to release the roller pin
and pull it out.
^ Push and take out the roller axle.
^ Take out the roller.
^ Remove all threads, hair, etc. and
reassemble the parts.
Spare parts are available from your
Miele vacuum dealer or Miele.
Maintenance and care
31