Memorex MM1540 - Manual (Page 7)

7
?? Brightness Hot Key Function
Press left button to adjust the brightness directly.
?? Contrast Hot Key Function
Press right button to adjust the contrast directly.
?? Power Button ( )
Press ( ) to turn the power on or off.
?? Power LED
The green light of power LED indicates the power is switched on and the
power cord is properly connected.
The red light indicates it’s in no signal applied or improper connection of
the signal cable.
3.3 R
ECOMMEND
R
ESOLUTION AND
M
ODE FOR
LCD M
ONITOR
We recommend that user choice one of the following modes. Show as
follows:
Resolution Frequency Resolution Frequency
720x400 31.5KHz/70Hz 800x600 48.1KHz/72.2Hz
640x480 31.4KHz/60Hz 800x600 46.9KHz/75Hz
640x480 37.9KHz/72Hz 1024x768 48.4KHz/60Hz
640x480 37.5KHz/75Hz 1024x768 56.5KHz/70Hz
800x600 35.2KHz/56.3Hz 1024x768 60KHz/75Hz
800x600 37.9KHz/60.3Hz
4. DISPLAY POWER MANAGEMENT
This monitor meets the power management standards as set by the Video
Electronics Standards Association (VESA) and /or the United States
Environmental Protection Agency (EPA). This feature is designed to conserve
electrical energy by reducing power consumption.
This function is active by an operating system or Windows utility program
which turns off the monitor display and also turns off or changes the color of
the monitor’s power LED.
Power
Mode
H-SYNC V-SYNC Video Indicator Consumption
ON Yes Yes Active Green <30W
Stand-by No Yes Blanked Amber <3W