Melissa Steel Series 253-002 - Manual (Page 11)

turn the timer knob to zero setting.
You may open the door while the oven is
operating. As soon as the door is opened, the
safety mechanism stops the microwave power.
To continue cooking, close the door again.
COOKING GUIDE FOR POWER CONTROL
SETTINGS
The Power–Control feature lets you cook at the
best power level for the food being cooked.
POWER CONTROL SETTINGS:
- HIGH
- MEDIUM
HIGH
- MEDIUM
- MEDIUM
LOW
- DEFROST
- LOW
Turn Power Select Control to correct required
power level
Select correct cooking time using Timer
CARE OF YOUR MICROWAVE OVEN
- Turn the oven off and remove the power plug
from the wall socket before cleaning.
- Keep the inside if the oven clean. When food
splatters or spilled liquids adhere to the oven
walls, wipe with a damp cloth. Mild detergent
may be used if the oven gets very dirty. The
use of harsh detergent or abrasives is not
recommended.
- The outside oven surface should be cleaned
with a damp cloth. To prevent damage to the
operating parts inside the oven, water should
not be allowed to seep into the ventilation
openings.
- Do not allow the control panel to become wet.
Clean with a soft damp cloth. Do not use
detergents, abrasives or spray on cleaners on
the control panel. When cleaning the control
panel, leave oven door open to prevent oven
from accidentally turning on.
- If steam accumulates inside or around the
outside of the oven door, wipe with a soft cloth.
This may occur when the microwave oven is
operated under high humidity conditions and in
no way indicates malfunctions of the unit.
- It is occasionally necessary to remove the
glass tray for cleaning. Wash the tray in warm
sudsy water or in a dishwasher.
- The roller ring and oven cavity floor should be
cleaned regularly to avoid excessive noise.
Simply wipe the bottom surface of the oven
with mild detergent, water or window cleaner
and dry. The roller ring may be washed in mild
sudsy water or dishwasher. Cooking vapours
collect during repeated use but in no way
affect the bottom surface or roller ring wheels.
When removing the roller ring from cavity floor
for cleaning, be sure to replace in the proper
position.
- When it becomes necessary to replace the
oven light, please consult a dealer to have it
replaced.
THE WARRANTY DOES NOT COVER
- If the above points have not been observed.
- If the appliance has not been properly
maintained, if force has been used against it or
if it has been damaged in any other way.
- If the appliance has been repaired or modified
or changed in any way by any person not
properly authorized.
- For malfunctions, which are due to failure in the
mains, supply.
IMPORTER:
Adexi A/S
Adexi AB
We take reservations for printing errors.
11