Philips CCB255AT - Manual (Page 11)

Automatic Channel Setup (cont’d) 11
4
Press the F.FWD/B button or the REW(ind)/{ button to
select SAVED (to add that channel) or DELETED (to
delete that channel).
Repeat steps 3-4 to add or delete other channels.
5
Press the STATUS/EXIT button.
Programming of the last channel you selected will appear.
3
Press the CH(annel) m m /n n button to select the channel
you want to add or delete.
• Line Input mode will always be
stored in the TV/VCR’s memory as
channel 00. You cannot delete it.
• To review the channels memorized
by the TV/VCR, follow these steps.
1) Press the COMBI button, then
press the MENU button.
2) Press the PLAY/▲ button or the
STOP/▼ button to select PRIM.
SETUP. Press the F.FWD/B button.
3) Press the PLAY/▲ button or the
STOP/▼ button to select CH MEM-
ORY REVIEW. Press the F.FWD/B
button. A list of programmed chan-
nels will appear on the screen.
4) If all the programmed channels
don’t fit on the screen, press the
F.FWD/B button. If you do not
press the F.FWD/B button within
10 seconds, the remaining channels
will appear on the screen. (If there
are no remaining channels, the pre-
vious menu will appear.) Or press
the REW(ind)/{ button to see the
previous screen of channels.
5) Press the STATUS/EXIT button
once or twice.
Helpful Hints
1
Press the COMBI button, then press the MENU button.
2
Press the PLAY/o button or the STOP/p button to select
CHANNEL.
Adding/Deleting Channels
TO ADJUST PRESS { / B
CH23
> CHANNEL
FM ANTENNA
SMARTLOCK
REVIEW
EXIT
PRIM. SETUP
SAVED
TO ADJUST PRESS { / B
CH123
> CHANNEL
FM ANTENNA
SMARTLOCK
REVIEW
EXIT
PRIM. SETUP
SAVED
TO ADJUST PRESS { / B
CH123
> CHANNEL
FM ANTENNA
SMARTLOCK
REVIEW
EXIT
PRIM. SETUP
SAVED
1
VAR.SLOW
CABLE/DBS COMBI
VOL.
CH.
FM
3
6
9
SURF 0
2
5
8
1
4
7
SLEEP/WAKE UP
REC/OTR
POWER
SPEED
STATUS/EXIT
STOP
PLAY
F.FWD REW
MEMORY
MUTE
VCR PLUS+
/ENTER
EJECT
MENU CLEAR
PAUSE/STILL
2,4
3
5