Metabo BW 600 - Manual (Page 2)

234 |
HS 5000 W HS 6001 D HS 6001 W
LOG SPLITTERS
Comparative device characteristics
Splitting force
5 t
Split length (maximum) 520 mm
Maximum stroke height 320 mm
Feed 4,5 cm/s
Return 9,5 cm/s
Dimensions L x W x H 1.200 x 260 x 485 mm
Mains voltage 230 V
Rated input power 2,2 kW
Weight 50 kg
Type HS 5000 W
Order no. 0170005000
With mobile stand – for a back-friendly operating height
and easy transportation
Guide plates directly at the splitting point for better guidance
of shorter wooden pieces
5 tonne splitting force for firewood up to 250 mm Ø
Motor with 2200 Watt power and for protection with
overload switch
Optimum protected two-hand safety circuit
For single phase alternating current
For adjusting to the wood length: stroke adjustable
in two steps and additionally adjustable piston length
Log Splitter
HS 5000 W
Special advantages
phase inverter
For single phase
alternating current
For three phase current
Comparative
device characteristics
Splitting force
6 t 6 t
Split length (maximum) 1.040 mm 1.040 mm
Maximum stroke height 480 mm 480 mm
Feed 4 cm/s 5 cm/s
Return 14 cm/s 14 cm/s
Dimensions L x W x H 860 x 930 x
1.040 mm
860 x 930 x
1.040 mm
Mains voltage 230 V 400 V
Rated input power 3 kW 3,5 kW
Weight 125 kg 125 kg
Type HS 6001 W HS 6001 D
Order no. 0170006001 0170006101
COMMON FEATURES
Easy and safe handling by 2-lever safety circuit
Hardened splitting wedge
Large recessed safety handles for protection
and for maximum safety
Wheel set for easy transportation
Foldable hoop guard protects the splitting material from
breaking apart and falling in an uncontrolled manner
Table can be adjusted to three levels for the processing
of longer logs
Closed lower housing section for more stability.
Optimum protection for the hydraulic system
Ergonomically located on/off switch
Log Splitter
HS 6001 W
Log Splitter
HS 6001 D
EQUIPMENT FEATURES