beautypg.com

Masterbuilt SSSMPG User Manual

Page 5

background image

The Masterbuilt Stainless Steel Pedestal Grill is fully assembled at time
of purchase.

3

1.

Read all instructions and warnings before lighting

2.

Check the gas control valve and gas cylinder valve to be certain it
is in the OFF position before connecting to the gas cylinder.
perform soapy water test before each use.

3.

Open lid during lighting

4.

Turn gas control valve on, turn gas cylinder valve on

5.

Push down knob and turn to 'ignite' and light

6.

Repeat up to three time if necessary

7.

If ignition does not take place immediately, wait five minutes and
then match light. See match light instructions below.

8.

After each use, first turn the gas control valve off first, then the gas
cylinder valve off. Always allow grill to cool completely before
touching, moving, or storing.

CAUTION: Fatty foods (like hamburgers) can have excess grease and can

cause flair up. When cooking fatty foods, use a low setting with lid open.

NOTE: Burner ring must be screwed down full length of threads to fall
through recessed area of burner ring. This will allow the burner ring to
sit flat on the burner. Failure to do this will cause a lazy flame.

BURNER LIGHTING INSTRUCTIONS

1.

Read all instructions and warnings before lighting

2.

Check the gas control valve and gas cylinder valve to be certain it
is in the OFF position before connecting to the gas cylinder.
perform soapy water test before each use.

3.

Open lid during lighting

4.

Turn gas control valve on, turn gas cylinder valve on

5.

Push down knob and turn to low setting

6.

Place a lit fireplace match through
lighting hole in back of grill.

7.

After each use, first turn the gas
control valve off first, then the gas
cylinder off. Always allow grill to cool
completely before touching, moving,
or storing.

MATCH LIGHTING INSTRUCTIONS

GRILL ASSEMBLY, BREAK DOWN & PARTS LIST

6

BEFORE LIGHTING

GRILL, CHECK BURNER

RING TO MAKE SURE IT IS

FIRMLY IN PLACE & FLAT

ON TOP OF CAST

BURNER BEFORE

LIGHTING. IF THE

BURNER RING IS NOT IN

PLACE PROPERLY, THE

BURNER WILL NOT BURN

CORRECTLY, PRODUCING

A LOW FLAME.

CAUTION: Opening lid

with caution during use. Grill is

very hot and will release heat.

BURNER RING CHECK