Memorex MVT2140 - Manual (Page 19)

19
ENGLISH
1 To display the picture adjustment
screen, press the MENU button.
Press the SET/TRACKING + or –
button to select the TV SET-UP
option, then press the ENTER
button.
2 Press the SET/TRACKING + or –
button to select the PICTURE
option, then press the ENTER
button.
BRIGHTNESS
Press the ENTER button until
“BRIGHTNESS” appears on the
screen, then press the SET/
TRACKING + or – button to adjust
the brightness of the picture. When
the SET/TRACKING + button is
pressed, the darker portions of the
picture become lighter.
CONTRAST
Press the ENTER button until
“CONTRAST” appears on the screen,
then press the SET/TRACKING +
or – button to adjust the contrast of
the picture. Pictures look sharpest
in the daytime (bright light) by
increasing the contrast. At night
Picture controls are factory preset but you can adjust
them individually as follows:
M E N U
TIMER REC SET
TV SET-UP
CH SET-UP
AUTO REPEAT ON OFF
SYSTEM SET-UP
〈 +/–/ENTER/MENU 〉
BRIGHTNESS 0
〈 +/–/ENTER/CANCEL/MENU 〉
CONTRAST 32
〈 +/–/ENTER/CANCEL/MENU 〉
NOTE: The CONTRAST default setting is set to maximum
at the factory.
〈 +/—/ENTER/MENU 〉
TV SET-UP
ON/OFF TIMER
PICTURE
PICTURE CONTROL ADJUSTMENTS
NOTE: The On-screen display will disappear 6 seconds
after finishing an adjustment or by pressing the
MENU button three times. The settings can only be
adjusted when they are displayed on the TV screen.
CANCEL
Pressing the CANCEL button while making picture
adjustments will return all adjustments to the factory
preset levels.
COLOR
Press the ENTER button until
“COLOR” appears on the screen,
then press the SET/TRACKING + or
– button to adjust the color intensity
of the picture. The control should be
set when colors appear normal in
intensity and brilliance.
TINT
Press the ENTER button until “TINT”
appears on the screen, then press
the SET/TRACKING + or – button to
adjust the tint of the picture. This
determines how accurately the
colors are reproduced by the TV.
Adjusting the tint for natural facial tone is the best method of
obtaining accurate color reproduction of the entire picture.
SHARPNESS
Press the ENTER button until
“SHARPNESS” appears on the
screen, then press the SET/
TRACKING + or – button to adjust
the sharpness of the picture.
SHARPNESS 0
〈 +/–/ENTER/CANCEL/MENU 〉
COLOR 0
〈 +/–/ENTER/CANCEL/MENU 〉
TINT 0
〈 +/–/ENTER/CANCEL/MENU 〉
(dim light), the sharpest picture is obtained by reducing
the contrast.
5A3B201A E P12-19 11/4/02, 12:43 PM 19