Miele CS1012 - Manual (Page 12)

Fast-Ignition-System
The gas combisets are equipped with a
Fast-Ignition-System which
incorporates the following features:
– The control knob does not need to
be pressed until the flame lights.
– If the flame goes out because of a
draft, for example, the burner is
automatically re-ignited.
If re-ignition is unsuccessful, the gas
supply is automatically interrupted
(see "Ignition safety control").
Turning on and off / Regulating
The control knob is used to turn on the
burner and to regulate the strength of
the flame.
ß Combiset is turned off
& Highest flame
/ Lowest flame
The knob must only be turned left to
turn the appliance on and right to
turn it off.
If the knob is :
-
turned on without pressing it
down first,
- turned clockwise to turn on, or
- turned counterclockwise to turn
the combiset off,
parts of the combiset might get
damaged. The manufacturer cannot
be held responsible for these
damages.
Use
12