Re-setting the grease filter timer 16, Cleaning and care, Re-setting the grease filter timer – Miele DA5000D User Manual
Page 16
Depending on the detergent,
cleaning the grease filters in a
dishwasher may cause permanent
discoloration of the filter surface.
Performance of the filter is not
affected by this discoloration.
^ After cleaning, the filters can be
placed on a towel to air dry.
^ While the filters are removed, clean
any dirt or grease from the filter
casing.
^ There is a groove on both sides of
the canopy, to collect grease. These
grooves and the retainers for the
grease filter should be cleaned every
time the filter itself is cleaned.
^ Put the grease filters back in place.
^ Touch any sensor button from "1" to
"4". The fan turns back on.
Re-setting the grease filter
timer
Each time you clean the grease filter,
also re-set the counter.
^ Touch the "s" sensor button to turn
on the fan.
^ Press and hold the "l" sensor button
for approx. 3 seconds, until only the
sensor button "1" is flashing.
The light for sensor button "
l" will go
out.
If you clean the grease filter before the
counter reaches the maximum number
of hours:
^ Press and hold the "l" sensor button
for approx. 6 seconds, until only
sensor button "1" is flashing.
Cleaning and care
16