Miele KM84-2 - Manual (Page 23)

Installation instructions
Place the seal provided f under
the edge of the cooktop.
b
Appliance
c
Tensioning screw
d
Clamp
e
Countertop
f
Seal
Turn the tensioning screws c
counterclockwise until a resistance is
felt, then turn the clamps
d
to the
left.
Place the appliance in position, turn
the clamps and tighten the tension-
ing screws until the clamps press
into the countertop
e
. Do not use ex-
cessive force.
Connect the appliance to the electri-
cal supply.
When installing several Combiset units,
a stainless steel spacer bar should be
installed between the units. It comes
supplied with its own installation instruc-
tions.
loosen tighten
Installation instructions
23