Operation – Memorex MKS8591 User Manual

Page 8

OPERATION

CONNECTING THE MICROPHONE(S)

This unit has two microphone jacks which will allow you to sing along with your favorite songs. Before

connecting, make sure the MIC VOLUME controls are set to minimum.

To turn the microphone(s) on, slide the ON/OFF switch(es), located on the side of the microphone(s), to the

ON position. To turn the microphone(s) off, slide the ON/OFF switch(es) to the OFF position.

HEADPHONES JACK

For private listening, connect low impedance 3.5mm (32 ohm) stereo headphones (not included) to this jack.

The speaker is automatically disconnected when the headphones plug is inserted into the jack.

Rotate the ECHO control clockwise to increase

the echo or counterclockwise to decrease the

echo.

ECHO CONTROL

Press this button to control the Left/Right

Speaker Channel and Vocal Off. Press once and

the display will show "V LEFT" for the Left

Channel. Press twice and the display will show

"V RIGHT" for the Right Channel. Press three

times and the display will show "V OFF" for the

balance of both channels.

VOCAL BUTTON

When the Vocal Auto feature is activated, the

vocals on a multiplex recording are muted as

soon as the singer begins singing into the

microphone. When the singer stops singing, the

vocals are automatically unmuted. Press the

VOCAL AUTO button to activate this feature.

IMPORTANT NOTE: This feature only works

with multiplex media.

VOCAL AUTO BUTTON

Slide the MONITOR switch to ON and the On-

Screen Graphics recorded on the CD+G disc will

appear on the monitor.

MONITOR SWITCH