Melitta ME10TDS - Manual (Page 8)

8
10. Switch coffeemaker to OFF since unit is not in use.
11. To brew another Carafe of coffee, turn unit OFF and wait 10 min-
utes to allow heating element to cool. Important: If unit is not
allowed to cool before immediate repeated use, water placed in
water chamber may become overheated and a spray of steam
could be released from opening, creating a risk of burns.
12. When not in use unplug the Base Assembly from the wall out-
let. Allow the unit to cool completely before cleaning. See
User Maintenance Instructions.
Brewing A Second Pot
Of Coffee
As mentioned above, it is recommended that the Coffeemaker
should be in the Off position for 10 minutes between cycles, in order
to allow unit to cool. While unit is in the Off position, dispose of used
coffee filter, rinse Carafe and the Removable Filter Basket in water.
Place a fresh filter in basket. Repeat brewing procedure.
Using the Timer Control
Your coffeemaker has a built in multifunction Timer. The following
sections describe the proper use of the Timer.
Setting The Clock
To set the clock, simply press and hold the “CLOCK/TIMER” Button
and press the “HOUR” Button until the desired hour has been
reached. Make sure the proper “AM/PM” indicator is shown on the
left side of the Digital Display. Press the “MIN” Button until the
desired minutes have been reached.
Note: Unplugging the unit will reset the clock to 12:00.
ME10TDS-373 3/25/03 9:59 AM Page 8