Additional information 7 – Marantz DV9600 User Manual
Page 64

Additional Information
7
64
• The unit will not output an audio signal if Audio has been
turned off under HDMI Setup. (page 54)
• Can the connected TV or HDMI component use the
selected audio settings?
Set the Audio settings under HDMI Setup. (page 54)
• Some HDMI-compatible monitors do not support audio
output.
• The unit will not output an audio signal if a DVI compo-
nent has been connected.
• The unit will not output multi-channel or stereo audio
signals from Super Audio CDs.
• The unit will not output audio from DVD-Audio discs with
CPPM copyright protection if the HDMI-connected
component does not support HDMI standard Ver. 1.1.
• The unit will not output audio from DVD-Audio discs that
prohibit downmixing if 2ch PCM is selected.
• Audio is not output when i.LINK is connected because
i.LINK has priority over HDMI. (page 55)
The unit does not output audio or video correctly
when connected to a DVI component.
• Select HDMI OFF by pressing the HDMI/DVI RESOLU-
TION button on the unit for three seconds or more.
(page 13)
The unit is connected to an i.LINK component but
the i.LINK indicator on the display does not light.
• Set the input selector on the connected AV amplifier to
this unit.
• Reset this unit and the AV amplifier by turning them off
and on.
The i.LINK indicator is lit but no audio is coming
from the connected i.LINK component.
• Check that the audio setting for i.LINK is On. (page 55)
• Can the connected AV amplifier use the selected audio
output format?
Set the Output Format under i.LINK Setup. (page
56)
• Set the input selector on the connected AV amplifier to
the i.LINK input.
• Audio will not be output if the i.LINK-connected AV
amplifier does not support the i.LINK AUDIO format.
• Audio will not be output if the i.LINK-connected AV
amplifier does not support copyright protection (DTCP).
• Are all components between the AV amplifier and this unit
turned on?
Signals cannot be transmitted if a component is turned
off.
Auto Play does not work.
Select the AV amplifier you wish to link under the Auto
Play setting. (page 56)
Multi-channel audio from a Super Audio CD or
DVD-Audio disc is not output from the connected
i.LINK component.
Select 5.1 channel from Audio Out under Audio Setup
1. (page 39)
The disc containing the MP3 tracks won’t play.
• If the disc is a recordable CD, make sure that the disc is
finalized.
Check that the track(s) are in the MPEG1 Audio Layer
3 format.
Check that the sampling rate of the track(s) are 44.1
or 48kHz.
Some MP3 tracks appear to be missing from a disc.
• If a track name does not end in “.mp3” or “.MP3”, this
player will not recognize it as an MP3 track.
• This player only recognizes about 600 files on a disc. If
there are more titles than this, you will not be able to play
them.
• This player is not compatible with multi-session discs. If
the disc is multi-session, you will only be able to play
tracks recorded onto the first session.
The unit is connected to an HDMI/DVI component
but the HDMI/DVI indicator on the display does
not light.
• Set the input selector on the connected TV or HDMI/DVI
component to this unit.
• This unit cannot be connected to TVs or HDMI/DVI
components that do not support HDCP.
• Reset this unit and the TV or HDMI/DVI component by
turning them off and on. (page 15)
No video appears on the connected HDMI/DVI
component.
• Is the indicator V OFF shown on the display?
The unit will not output a video signal if the video
output has been disabled. Enable the video output
with the VIDEO ON/OFF button on the remote
control.
• The unit will not output a video signal if the video output
has been disabled in Pure mode.
• Can the connected TV or HDMI/DVI component use the
selected resolution and format?
Set the Resolution and Format under HDMI Setup.
(page 52)
• Set the input selector on the connected TV or HDMI/DVI
component to this unit.
• Press the CLEAR button on the remote control for three
seconds or more. This reverts the unit to its default
settings. (page 15)
• TVs or HDMI/DVI components that do not support
HDCP cannot output video from this unit.
No audio is coming from the connected HDMI
component.
• Is the indicator V OFF shown on the display?
The unit will not output an audio signal if the video
output has been disabled. Enable the video output
with the VIDEO ON/OFF button on the remote
control.
• The unit will not output an audio signal if a CD is played
while the video output has been disabled in Pure mode.
(page 51)