Mercedes-Benz 2003 CLK 500 - Manual (Page 307)

307
Practical hints
Where will I find...?
̈ Turn the crank handle clockwise until it
engages (operational position).
Before storing the vehicle jack in its com-
partment:
ț It should be fully collapsed
ț The handle must be folded in (storage
position)
Minispare wheel
The Minispare wheel is located in the com-
partment underneath the trunk floor.
1 Vehicle tool kit
Wheel wrench
Jack
2 Arrow
3 Minispare wheel
4 Vehicle tool kit storage well casing
Removing the Minispare wheel
̈ Lift trunk floor cover and engage trunk
floor handle in upper edge of trunk.
̈ Loosen the retaining screw
(
୴ page 305) in the middle of storage
well casing. Remove the storage well
casing.
̈ Remove vehicle tool kit storage well
casing 4.
̈ Remove Minispare wheel 3.