Miele DA 337 I - Manual (Page 39)

Electrical connection
Electrical connection
All electrical work should only be per-
formed by a qualified electrician in ac-
cordance with national and local safety
regulations.
The hood comes equipped with a
5 ft (1,5 m) power cord for connection
to a 120 VAC, 15 A, 60 Hz power out-
let.
Verify that the information on the data
plate matches the household electrical
supply before installing the hood. The
data plate is visible once the grease fil-
ter has been removed.
Important
CAUTION:
Ensure that power supply is OFF
during installation.
If you have any questions as to how
to connect this hood to your build-
ing power supply, please call Miele
or consult a licensed electrician.
WARNING
THIS APPLIANCE MUST BE
GROUNDED
Electrical connection
39