beautypg.com

Melissa Cordless Jug Kettle 245-005 User Manual

Page 10

background image

PRODUCT DESCRIPTION:

1. Spout

2. Lid

3. Water

level

indicator

4. Control

lamp

5. On/Off

button

6.

Contact

7.

Base with cord

storage

INSTRUCTIONS FOR USE:

-

Before first use, fill the kettle with clean water

to maximum capacity and boil. Discard the

water and repeat.

-

The kettle should always be unplugged when

filling or adding water.

-

Fill the kettle with water to the desired level.

Do not overfill or there will be a risk of

spillage or spitting. The water level indicator

will assist you to measure correct amount.

You can fill the kettle via the spout or after

opening the lid. Do not forget to close the lid

after filling otherwise the kettle will not

automatically switch off after use.

-

Do not fill with less that 0,35 litre of water.

-

Do not fill with more than 1,2 litres of water

(up to "MAX" indication).

-

An automatic safety cut-out has been fitted

for protection against overheating. It will

operate if the kettle is switched on when

containing insufficient water.

-

If the automatic safety cut-out has operated,

switch the kettle off, disconnect from the

power outlet and allow the kettle to cool

down for 5- 10 minutes. Then refill with water

and switch on - the kettle will then boil and

cut off as in normal operation.

-

The kettle may be switched off at any time

by either pushing the switch of the kettle to

the "up" position or by switching the power

off at the power outlet.

-

To pour water, lift the kettle from the power

base and pour

CORDLESS KETTLE:

-

Place the power base on a dry, flat surface.

-

Place the kettle on the power base. The

electrical connections will be made

automatically as the kettle slides onto the

power base.

-

Plug the cord into an eathed power socket

and switch on by depressing the switch of

the kettle to the "down" position.

-

When the water has boiled, the kettle will

switch off automatically. After allowing the

kettle to cool down for 30 seconds, the water

can be brought back to the boil by pushing

the switch back to the "down" position.

During the cooling down time do not force

the on/off switch into the "down" ("ON")

position as this can damage the operating

mechanism.

-

Do not remove the kettle from the power-

base without first switching off.

-

The kettle may be switched off at any time

by either pushing the switch of the kettle to

the "up" position or by switching the power

off at the power outlet.

-

To pour water, lift the kettle from the power

base and pour.

HOW TO CARE FOR YOUR KETTLE:

Wipe the exterior of the kettle with a soft, damp

cloth or sponge. Remove stubborn spots with a

cloth moistened with mild liquid detergent. Do not

use abrasive scouring pads or powders. Never

immerse the kettle in water or other liquids.

Since this kettle has concealed heating element,

is it important to keep the bottom clean, between

the decalcification you may use a washing-up

brush or sponge.

From time to time, dependent on the nature of

your water supply, a limescale deposit is naturally

formed and can be found mostly adhered to the

heating element and reduce the heating capacity.

The amount of limescale deposited (and

subsequently the need to clean or descale) largely

depends on the water hardness in your area and

the frequency with which the kettle is used.

14

1

2

3

4

5

7

6

245-005IM 03/09/02 16:06 Side 14