Marantz IS301 - Manual (Page 19)

13
NAMES AND FUNCTIONS
ENGLISH
BASIC
OPERA
TIONS
ADV
ANCED
OPERA
TIONS
TROUBLESHOOTING
OTHERS
ADV
ANCED
OPERA
TIONS
MOUNTING ON A WALL
This unit can be mounted on a wall. Read the precautions described below and carefully install the unit.
For safety, it is recommended to delegate mounting to a professional contractor.
NOTES ON INSTALLATION LOCATION
• Before installation, check the material and construction compatibilities of the installation location. If they
are not assured, the unit may fall, which may result in personal injury.
• NEVER mount the unit in a location subject to lot of vibration, shock, or strong force. Doing so may cause
a fall or damage of the unit and may result in personal injury.
• Before installation, make sure that there is no electrical wiring nor piping inside the wall.
PRECAUTIONS ON INSTALLATION
• NEVER modify the unit or use it in an inappropriate way. Dropping the unit may result in personal injury.
• The supplied wall-mounting screws are for wooden walls. If the unit is to be mounted on a wall other
than wooden walls, procure commercially available screws suitable for the structure and materials of the
wall.
• Secure the screws tightly when mounting the base unit. Loose screws may cause an accident, such as
falling of the unit. NEVER leave the screws not securely tightened.
• NEVER mount the unit so that it will protrude away from an exterior corner of the wall. Doing so may lead
to personal injury, because a person or object may bump into the unit.
• Marantz accepts no responsibility whatsoever for any accident or damage resulting from improper
mounting or handling.
• When mounting, be careful not to pinch your fi ngers or hands.
• Make sure that the two screws are securely tightened in the holes for wall mounting of the extender.
ADVANCED OPERATIONS
INSTALLATION PROCEDURES FOR THE BASE UNIT
1. Remove the handset from the base unit.
2. Push the stopper holder from through the hole on the bottom of the base unit.
Stopper
3. With the handset holder raised, push the stopper down so that it clicks and locks in place.
C O M PO SIT E COMPONENT
S-VIDEO
Stopper
Handset holder
Release button
4. Connect the cables.