Miele G 2143 - Manual (Page 15)

Adjusting the dosage
The dosage selector is preset to 3. This
dispenses approximately 3 ml of rinse
aid per program. It can be adjusted
from 0 to 6.
– Use a higher setting if spots appear
on dry glassware.
– Use a lower setting if streaking
appears on dishes or glasses.
^ Turn the dishwasher off "s".
^ Press and hold the "Start / Stop"
button and at the same time turn the
dishwasher on "
s". Hold the "Start /
Stop" button until the "Start / Stop"
indicator comes on.
If it does not come on, start over.
^ Press the "Delay Start" button three
times.
The "Rinse & Hold" indicator flashes 3
times in intervals.
The rinse aid dosage is adjusted to
3 ml by default.
The amount set can be recognized by
the flashing rhythm of the "Rinse"
indicator (see table):
Dosage in ml Flashing rhythm
"Rinse"
0 -
1 Once
2 Twice
3 3 times
4 4 times
5 5 times
6 6 times
^ Select the desired setting with the
"Start / Stop" button. Every touch of
the button increases the level.
The programmed dosage is saved.
^ Turn the dishwasher off "s".
Before using for the first time
15