Martin Audio Miniature Stage Monitor WM0.5 - Manual (Page 3)

WM0.5
Miniature stage monitor
Century Point, Halifax Road, Cressex Business Park,
High Wycombe, Buckinghamshire HP12 3SL, England.
Telephone: +44 (0)1494 535312 Facsimile: +44 (0)1494 438669
E-mail: [email protected]
All information is Copyright © 2006 Martin Audio Ltd.
www.martin-audio.com
3 of 3
touring and theatre
architectural and engineering specifications
The loudspeaker system shall be of the two-way passive
type consisting of one 8" (200mm) direct radiating
reflex loaded low frequency transducer and one 1"
(25mm) ferrofluid cooled high frequency driver
mounted in a miniature low-profile plywood enclosure.
The enclosure shall be fitted with threaded inserts for
wall and ceiling mounting. Low and high frequency
sections shall be integrated by an internal 3kHz passive
crossover network.
Performance of the loudspeaker system with its
electronic controller shall meet or exceed the following
criteria:
Frequency response measured 1 metre on axis shall be
70Hz-18kHz ±3dB.
High frequency dispersion at -6dB points shall be
50˚H x 70˚V.
Power handling shall be 125W AES, 500W peak.
Rated impedance shall be 8 ohms.
Maximum SPL measured at 1 metre on axis shall be
114dB continuous, 120dB peak.
Dimensions (W) 390mm x (H) 276mm x (D) 270mm
(15.3ins x 10.9ins x 10.6ins).
Weight 9kg (19.8lbs).
The loudspeaker system shall be the Martin Audio
WM0.5.
NN oo tt ee ss
(1) Measured on-axis in half space at 2 metres, then referred to 1 metre.
(2) AES Standard ANSI S4.26-1984.
(3) Measured in half space at 2 metres with 1 watt input, using band limited pink noise, then referred to 1 metre.
(4) Measured in half space at 2 metres using band limited pink noise, then referred to 1 metre.
(5) Measured on-axis in open (4
π) space at 2 metres, then referred to 1 metre.
(6) Measured in open (4 π) space at 2 metres with 1 watt input, using band limited pink noise, then referred to 1 metre.
(7) Measured in open (4 π) space at 2 metres using band limited pink noise, then referred to 1 metre.
TTrr aa dd ee DD ee ss cc rr ii pp tt ii oo nn ss AA cc tt
Due to Martin Audio’s policy of continuing improvement, we reserve the right to alter these specifications without prior notice.
Martin Audio is committed to refining state of the art sound reinforcement, combining in-depth product and field applications
research with advanced manufacturing techniques. Every Martin Audio product is built to the highest manufacturing standards
and rigorously tested to ensure that it meets the performance criteria specified in the design.
technical specifications
TYPE Miniature two-way passive stage monitor
FREQUENCY RESPONSE (5) 70Hz-18kHz ± 3dB
-10dB @ 50Hz
DRIVERS 8" (200mm) bass driver
1" (25mm) exit HF compression driver
RATED POWER (2) 125W AES, 500W peak
RECOMMENDED AMPLIFIER 300-400W into 4 ohms
SENSITIVITY (6)
94dB
MAXIMUM SPL (7) 114dB continuous, 120dB peak
NOMINAL IMPEDANCE 8 ohms
DISPERSION (-6dB) 50º horizontal, 70º vertical
CROSSOVER 3kHz passive
FINISH Textured grey paint
PROTECTIVE GRILLE Grey perforated steel
CONNECTORS 2 x Neutrik NL4
FITTINGS 4 x M8 threaded inserts
DIMENSIONS (W) 391mm x (H) 270mm x (D) 334mm
(W) 15.4ins x (H) 10.6ins x (D) 13.1ins
WEIGHT 9kg (19.8lbs)