MITSUBISHI ELECTRIC EX100 - Manual (Page 15)

EN - 15
ENGLISH
Menu operation
IMAGE
XGA60
opt.
INSTALLATION
opt.
XGA60
INSTALLATION
opt.
AUTO POWER
ON
AUTO POWER
OFF
OFF
OFF
XGA60
AUTO POWER
ON
AUTO POWER
OFF
OFF
OFF
AUTO POWER
ON
AUTO POWER
OFF
30 min
OFF
Basic operation
Several settings can be adjusted using the menu.
Example : Auto power off time setting
1. Press the MENU button.
2. Press the or button to select INSTALLATION.
3. Press the ENTER button (or button).
4. Press the or button to select AUTO POWER
OFF.
5. Press the or button to adjust the auto power
off time.
6. Exit the menu by pressing the MENU button sev-
eral times.
Important:
• When the button doesn't function, unplug the
power cord from the wall outlet. Wait about 10
minutes, plug the power cord in, and try again.
• After selecting the items marked with , press
the ENTER button.
IMAGE CONTRAST ±30
BRIGHTNESS ±30
sRGB ON, OFF
CineRichColor AUTO, 0 - 10
STANDARD
LOW
HIGH
USER
COLOR TEMP.
COLOR ±10
TINT ±10
SHARPNESS ±5
GAMMA MODE AUTO, DYNAMIC, STANDARD, THEATER
CONTRAST R ±30
CONTRAST B ±30
BRIGHTNESS R ±30
BRIGHTNESS B ±30
INSTALLATION
OFF, MIRROR, INVERT, MIRROR INVERT
AUTO POWER ON ON , OFF
RESET ALL OK
AUTO POWER OFF
ON , OFF
FEATURE MENU POSITION 1 (Upper left), 2(Lower right)
IMAGE REVERSE
SPLASH SCREEN
BLUE, BLACK BACK COLOR
STANDARD, LOW LAMP MODE
MENU ACCESS PASSWORD FUNCTION
VIDEO SIGNAL AUTO , NTSC , PAL , SECAM , 4.43NTSC , PAL-M , PAL-N , PAL-60
LANGUAGE , English, Español, Deutsch, Français, Italiano, , , ,
SIGNAL HORIZ.POSITION
HOLD
0 - 999
VERT.POSITION 0 - 999
FINE SYNC. 0 - 31
TRACKING
USER
0 - 9999
CLAMP POSITION 0 - 63
CLAMP WIDTH 1 - 63
*5
*3
*3
*3
*3
*3
AUTO , OFF CINEMA MODE
*5
*5
ON BEGIN 0 - 15
END 0 - 15 OFF
COMPUTER INPUT RGB, YC B C R / YP B P R
SET UP OFF / 3.5% / 7.5%
*5
*5
*5
*5
OFF, 5, 10, 15, 30, 60 min
OK
ON , OFF ANAMORPHIC
ON
UNLOCK OK
LOCK
*1
*1
*1
*2 *1
*1
*4
*2
* 1: Not available when sRGB is set to ON.
* 2: Not available with certain signals.
* 3: Not available when the source is a VIDEO
or S-VIDEO signal.
* 4: Available only when the input signal is TV60, 480i.
* 5: Setting range differs depending on the input signals.
(These items are not available when the
input source is COMPUTER.)