Maytag MIM1554WRS User Manual

Page 6

Remove door

1. Unplug ice maker or disconnect power.
2. Remove the handle screws and handle (on some models).

Keep the parts together and set them aside.

3. Remove the hinge pin from the top hinge.
4. Remove the door from the hinges and screw the top hinge pin

back into the top hinge.

5. Reverse the door end caps as follows:

■

Remove the screw and end cap from the top corner. Move
it diagonally to the opposite side's bottom corner, keeping
the straight side of the end cap facing the front of the ice
maker.

■

Remove the screw and end cap from the bottom corner.
Move it diagonally to the opposite side's top corner,
keeping the straight side of the end cap facing the front of
the ice maker.

6. Set the door aside.

Reverse Hinges

1. Unscrew and remove the top hinge. Replace the screws in the

empty hinge holes.

2. Remove the screws from the bottom of the opposite side of

the ice maker cabinet. Turn the top hinge upside down so that
the hinge pin points up. Place the hinge on the bottom
opposite side of the ice maker and tighten screws.

3. Remove the plastic hinge pin sleeve from the “old” bottom

hinge and replace it on the new bottom hinge pin.

4. Remove the “old” bottom hinge screws and hinge. Replace

the screws in the empty hinge holes.

5. Remove the screws from the top of the opposite side of the

ice maker cabinet. Turn the hinge upside down so that the
hinge pin points down. Place the hinge on the top opposite
side of the ice maker and tighten the screws.

6. Remove the top hinge pin.

Replace Door

1. Place plastic hinge pin sleeve in the top hinge hole on the

door. Align the door with the top hinge hole and replace the
top hinge pin.

2. Replace the handle and handle screws.

Top Hinge

Bottom Hinge

Reverse Door Catch

1. Remove the hole plugs from the opposite side of the door and

set aside.

2. Remove the screws from the magnetic door catch and replace

it on the opposite side of the door.

A. Top corner open (no end cap)
B. Beginning top corner end cap

C. Beginning bottom corner end cap
D. Bottom corner open (no end cap)

A. Hinge pin
B. Hinge pin sleeve

C. Hinge
D. Hex-head hinge screw

A. Hex-head hinge screw
B. Hinge pin sleeve

C. Hinge
D. Hinge pin