Maytag Agility F6212901 - Manual (Page 14)

If the fault is something that you cannot correct yourself, please contact:
• 01737 231000 - our Consumer Response Centre (9AM - 5PM, Monday - Friday)
• [email protected]
Cord Replacement
This MAYTAG appliance is supplied complete with a plug.
If the main cord of this appliance is damaged, the appliance must be repaired by an Authorised Maytag
Repairer to avoid safety hazard.
The 2 year guarantee on your AGILITY™ Deep Cleaner becomes effective from your date of purchase. We
suggest you record the model and serial number from the information plate on your AGILITY™ Deep
Cleaner and retain it with your original proof of purchase.
This guarantee covers all materials and manufacturer assembly of your AGILITY™ Deep Cleaner.
All repairs must be authorised in advance by our Consumer Response Centre and subsequently completed
by an authorised agent. Any repair completed under guarantee will not extend the original period of your
product guarantee.
This guarantee applies to normal domestic use only.
This guarantee does not cover normal wear and tear, negligence, misuse, accidental damage, blockages or
consumable items.
This guarantee does not cover any consequential loss.
These guarantee benefits are in additional to your statutory rights.
Troubleshooting and Service
IMPORTANT
Guarantee
Use the list below to help solve minor problems.
What’s the What to do
problem?
Deep cleaner won’t run ✓ Make sure the cleaner is plugged in firmly.
✓ Check the fuse.
Low suction ✓ Empty the recovery tank; it may be full and the
automatic shut-off engaged.
✓ Make sure recovery tank cap is securely latched.
Cleaning solution won’t ✓ Make sure solution tank is securely in place.
dispense ✓ Refill the solution tank if it is empty.
Brushes won’t rotate ✓ Clean brush filter as described in Fig. 45.
✓ Set Brush Speed Selector to ON.
Low suction in hose during ✓ Make sure recovery tank cap tool use is securely
tool use latched.
✓ Disconnect hose from cleaner and check for block-
age in hose.
14