MTD 2N1 - Manual (Page 15)

Maintenance
Lubrication
Lubricate the pivot points on the control handle and the
extension spring at the end of the control cable with a light
oil once every season and before the snow thrower is put into
storage at the end of the season.
Off-Season Storage
If the snow thrower will not be used for 30 days or longer, follow
the instructions below.
Store the equipment in a clean, dry area. 1.
If storing the snow thrower in an unventilated area, rustproof 2.
the machine using a light oil or silicone to coat the snow
thrower.
Clean the exterior of the engine and the snow thrower.
3.
15 s
ectiOn
6 — M
aintenance
& a
djustMents