beautypg.com

Cleaning and maintenance, Crumb tray, Additional points – Morphy Richards 4 slice polished chrome toaster User Manual

Page 4

background image

Morphy Richards products are intended for household use only.

Morphy Richards has a policy of continuous improvement in product quality and design.

The Company, therefore, reserves the right to change the specification of its models at any time.

Morphy Richards Limited, Mexborough,
South Yorkshire, England, S64 8AJ

444/8502/15 Rev 1

Using your re-heat button

If you toast has popped up and gone cold,

the toaster offers a re-heat facility. To use,
depress the bread carriage lever and press
the re-heat button immediately

. The

button will illuminate and the toaster will
operate for a short period re-heating the
bread.

Using the high lift release

If small bread is toasted, this may be

removed more easily by lifting the bread
carriage lever.

Cleaning and Maintenance

Cleaning and Maintenance

Cleaning and Maintenance

Cleaning and Maintenance

Cleaning and Maintenance

1 After use and before cleaning, switch off

at the mains, remove the plug from the wall
socket and wait for the toaster to cool.

2 Wipe the outside of the toaster with a damp

cloth only and dry with another cloth or
tissue.

NEVER use metal polish or coarse scouring
agents and never immerse your toaster in
any sort of liquid.

NEVER use any pointed or sharp articles
for cleaning the inside, otherwise the
heating element will be damaged.

NEVER use a brush or push your fingers or
metal objects down the slots.

Crumb tray

Crumb tray

Crumb tray

Crumb tray

Crumb tray

Crumbs will accumulate in the crumb tray

and could catch fire if not emptied periodically.
When the toaster has cooled down completely,
tap the sides of the case lightly to dislodge any
crumbs lodged in the toasting chamber and pull
out the crumb tray

. Empty the tray and

replace it.

Never operate the
toaster without
the crumb tray
fitted.

Additional points

Additional points

Additional points

Additional points

Additional points

In order to achieve uniform browning, we
recommend you wait a minimum of 30
seconds between each toasting, so that the
control can automatically be reset.

If toasting one slice only, you may need to
adjust the browning control to a slightly
lower setting.

Note you will also notice a slight
variation in toast colour on one side of a
single slice.

Stale bread toasts more rapidly than fresh
bread. Therefore, the browning control
should be set at a lower setting than usual.

All sorts of bread can be used as well as
teacakes, small rolls etc. Slices should not
however be so thick as to cause burning or
jamming within the bread slots.

When toasting 2 slices it is recommended
they are of equal size and freshness.
Allow the toaster to cool fully before putting
away.