beautypg.com

Specifications, English – NEC MultiSync LCD1760VM User Manual

Page 14

background image

English

English-13

Specifications

Monitor Specifications

MultiSync LCD1760VM Monitor

Notes

LCD Module

Diagonal:

43.2 cm/17 inches

Active matrix; thin film transistor (TFT)

Viewable Image Size:

43.2 cm/17 inches

liquid crystal display (LCD); 0.264 mm

Native Resolution (Pixel Count):

1280 x 1024

dot pitch; 250cd/m

2

white luminence,

typical; 350:1 contrast ratio, typical.

Input Signal

Video:

ANALOG 0.7 Vp-p/75 Ohms

Digital Input: DVI

Sync:

Separate sync.TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. Positive/Negative*

3

Sync on Green (Video 0.7 Vp-p and Sync. 0.3 Vp-p)*

3

Display Colours

16,194,277

Depends on display card used.

Synchronization Range

Horizontal:

31.5 kHz to 81.1 kHz (Analog)

Automatically

31.5 kHz to 69 kHz (Digital)

Automatically

Vertical:

56 Hz to 75 Hz

Automatically

Viewing Angle

Left/Right:

±70°

Up/Down:

±60°

Resolutions Supported

720 x 400*

1

at 70 Hz

Some systems may not

640 x 480*

1

at 60 Hz to 75 Hz

support all modes listed.

800 x 600*

1

at 56 Hz to 75 Hz

832 x 624*

1

at 75 Hz

1024 x 768*

1

at 60 Hz to 75 Hz

1152 x 870*

1

at 75 Hz

1280 x 1024*

2

at 60 Hz to 75 Hz (Analog)

1280 x 1024*

2

at 60 Hz (Digital)

Active Display Area

Horizontal:

337.9 mm/13.3 inches

Dependent upon signal timing.

Vertical:

270.4 mm/10.6 inches

Power Supply

100 - 240 V ~ 50/60 Hz

Current Rating

0.75 - 0.4 A

Dimensions

374 mm (W) x 372.8 ~ 482.8 mm (H) x 205.0 mm (D)
14.7 inches (W) x 14.7 ~ 19 inches (H) x 8.1 inches (D)

Weight

6.8 kg (15 lbs)

Environmental Considerations

Operating Temperature:

5 °C to 35 °C

Humidity:

30% to 80%

Altitude:

0 to 3,000 m

Storage Temperature:

-10 °C to +60 °C

Humidity:

10% to 85%

Altitude:

0 to 12,000 m

Speakers Practical Audio Output

1.0W + 1.0W

*1 Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear different. This is
normal and necessary for all current flat panel technologies when displaying non-native resolutions full screen. In flat panel technologies, each dot on
the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of the resolution must be done.
*2 NEC-Mitsubishi Electronics Display cites recommended resolutions at 60 Hz for optimal display performance.
*3 If your display is not showing a picture for the SOG and Composite Sync. Signal, please contact our hotline for further assistance.

NOTE:

Technical specifications are subject to change without notice.