McIntosh MA2275 User Manual

Page 13

How to Connect for a Second Room

1. Connect Audio Cables from the MA2275 OUTPUTS

PREAMP 2 to the second Power Amplifier Inputs.

2. Connect Hookup Cables from the second Power Ampli-

fier to the Loudspeakers. Refer to page 11 in this
Owner’s Manual for connection details.

3. Connect a Control Cable from the MA2275 POWER

CONTROL MAIN Jack to the Power Control In of a
McIntosh Power Amplifier.

4. Connect an RG6 or RG59U coaxial cable from the

EXTernal SENSOR Jack to a McIntosh Keypad.

Note: A Wall Mounted IR Sensor may also be used in

place of the Keypad.

Right
Loudspeaker
4 ohm

Left
Loudspeaker
4 ohm

McIntosh Power Amplifier

Keypad