Miele T 1313 - Manual (Page 34)

Exhaust connection with a
flexible exhaust hose or rigid
pipe
Using the connector supplied, an
exhaust hose (4" [100 mm]
diameter) can be installed.
Necessary materials:
– a wall or window duct
– an exhaust hose made of approved
non-flammable material
^ If the duct length is more than 33 ft
(10 m), remove the ring adapter, 1 ,
from the connector, 2 . If the duct
length is less than 33 ft (10 m), leave
the ring adapter in to improve time
and energy efficiency.
^ Install the connector, 2 , with the
exhaust hose or pipe, 3 , to the dryer.
Window connection
1 Window connection (installed in a
plexiglass pane)
2 Connector for the flexible exhaust hose
Wall connection with rigid pipe
1 Wall pipe
2 Connector
3 Rigid pipe
Installation
30