MGE UPS Systems Pulsar EXtreme 1000C - Manual (Page 24)

Page 24 - 51031604EN/AB
E
F
4. Maintenance
B
A
Rack model
Removal of battery module
A - Remove the two screws securing the door.
B - Slide the door open and remove it.
C - Unscrew the bar that holds the battery module in place.
D - Remove the bar.
E - Disconnect the battery module.
F - Remove the battery module.
Reinstallation of the battery module
Carry out the above operation in reverse order.
◗ To maintain an identical level of performance and safety, use a battery module identical to that previously mounted in the
UPS.
◗ Press the two parts of the battery connector tightly together to ensure proper connection.
D
C